Projects

Monday, December 17, 2012

Laying Some Groundwork

A little while ago I started work on a simple section of board to take pictures of my farmstead on. It didn't go so well. It just wasn't flat enough for the house and other terrain to sit on nicely. So I decided to take another approach. I borrowed an idea from Spacejacker over at Tiny Solitary Soldier and picked up a simple vinyl tile at a local hardware store. Its a foot square and I looked for one that had the most surface detail. I sprayed it black and dry-brushed it up through brown in the recessed areas.

Next I layed down some ground scatter across all of the areas that I wanted to get covered with grass. I used the same fine turf that I've used previously on the trees.

I forgot to take a picture of the tile after just the dry-brushing. Here it is with the turf applied.


I've always had a problem with the turf wearing away in the past so I experimented with soaking the whole board with a mix of watered down glue. I also wanted it to act like an ink wash so I mixed a little paint into it as well. I applied this with a pipette so it thoroughly soaked all of the turf.

While still wet I also put some glue directly on in spots and then hit this with some static grass clumps. I sprinkled more static grass around as well. 

Just after I put the static grass on and still soaked with glue.
Coming back the next day I saw both good and bad. The turf was attached very solidly so that worked out well. The paint in the mix though didn't act so much as an ink-wash as it just colored all the turf a similar color. It also left distinct edges anywhere it didn't get too. Not a total loss though. I dry-brushed some greens and browns on to blend things together and give some more definition.


 Room for improvement but I think it turned out fine. I'm considering getting 4 more and making a quick and easy board to play on.



2 comments:

  1. Brilliant, Brian! You make it look easy--I will try this myself and see how it goes. Great idea!

    ReplyDelete
    Replies
    1. Thanks Scott, but I can't take all the credit as I borrowed the basic idea. I didn't mention this above but the tiles have adhesive applied to the back of them. I rubbed some dirt on the back of mine so it wasn't too tacky but the longer it sits anywhere the more it sticks to it. But at 88 cents each it's hard to beat.

      Delete

Related Posts Plugin for WordPress, Blogger...